Presentation of my thesis paper draft.Here is the link to my thesis presentation draft.Here is the link to my paper draft / outline / mess of words. https://videopress.com/v/6ozwme14?resizeToParent=true&cover=true&autoPlay=true&controls=false&loop=true&muted=true&persistVolume=false&preloadContent=metadata&useAverageColor=true Harvey Moon – Drawing Machines
Tag: Fall 2022
Thesis Prototyping – Phase 1
Seeing Machines – Project Proposal
Here are the slides from my project proposal – which is pretty much a prototype for my thesis project. https://videopress.com/v/6ozwme14?resizeToParent=true&cover=true&autoPlay=true&controls=false&loop=true&muted=true&persistVolume=false&preloadContent=metadata&useAverageColor=true Harvey Moon – Drawing Machines
Subtraction – Final Project
For my final project I’ve decided to build a lamp. Initially, I wanted to build the lamp I had drawn up around the time of the CNC assignments, which has the design below. And looked like a little person, similar to this design. But after some consideration, thinking of what tools I can use and…… Continue reading Subtraction – Final Project
Seeing Machines HW #4 – Communication
For this assignment we had to use a communication protocol between two programs (one had to be OpenFrameworks). I chose to use OSC to communicate between OpenFrameworks and Processing. In OF, I used object tracking and sent the object’s x and y coordinates to processing to control a circle. Eventually, my code in processing became…… Continue reading Seeing Machines HW #4 – Communication
Week 10(?) – MQTT
I had a late start to this assignment, but now I’m working on using the loudness sensor I ordered. Ran into a couple roadblocks just setting up the Arduino to read the sensor, when I realized I had to short the VUSB pads at the bottom of my Arduino in order to enable the 5V…… Continue reading Week 10(?) – MQTT
Week 9 – Arduino Client
I tried to run the simple client code on my Arduino to communicate with my website http://www.biancasbread.com, and at first it would respond with a ‘301 moved permanently’ message, and I thought it was because I was trying to request through http and not https … ? So next, I tried to adjust the code…… Continue reading Week 9 – Arduino Client
Week 10(?) – 4-Axis Milling
So many steps !!!! I didn’t really know what I wanted to make for this skill builder, I thought about doing a tealight candle holder, just some kind of simple shape. Ended up drawing this curvy thing that I’ll probably end up drilling a hole into the side / top to fit some kind of…… Continue reading Week 10(?) – 4-Axis Milling
Week 8 – Node.js
To start, the goal is to get the simplest of simple node applications working on my local host. I followed the steps to create a project directory and install express. I tried to build off of the simpleServer example from class that would receive a query with a name and respond with a string of…… Continue reading Week 8 – Node.js
Week 7 (?) – More Turning
This week we have to turn a wooden mallet — consisting of a mallet head, handle, and pin. I purchased a pack of 2″ x 2″ x 12″ square blanks of lumber as well as a chunk of maple ambrosia that was 3″ x 6″ x 6″ that I cut down to about 3″ x…… Continue reading Week 7 (?) – More Turning