Intro to Asynchronous Serial Communications A Serial Output Sketch https://videopress.com/v/XCu7lmZ1?resizeToParent=true&cover=true&preloadContent=metadata A had a bit of an issue starting this lab where my Arduino would not power on. It wasn’t the USB cable, and it would power on if I unplugged the Arduino from my breadboard, so it had to be something connected on the board.…… Continue reading P Comp Week 6 Labs
Tag: P Comp
ICM Week 3 Sketch
P Comp Project 1
Flushing out some ideas– Idea 1 The first idea I had was to make a pressure sensitive microphone tin/holder. When I work on shows, we have aluminum bread tins that hold wireless microphones. My thought was to add force sensitive resistors to the base of it below some type of layer that when something is…… Continue reading P Comp Project 1
P Comp Week 3 Labs
To start this lab, I did not have a working speaker, so I rigged this tool I have from work that can take an input and produce it over a small built in speaker. I soldered a 1/4″ jack to a ground and hot wire to put into my breadboard to replace the “+” and…… Continue reading P Comp Week 3 Labs
P Comp Week 2 Labs
Digital Input and Output with an Arduino Preparing the Breadboard and Adding a Pushbutton Why does the pulldown resistor need to be a 10kΩ? How does it correlate to the button/switch? Adding Digital Outputs (LEDs) and Programming the Arduino When it came to programming the board, I wrote out all the code and got to…… Continue reading P Comp Week 2 Labs
Bianca Gan 